Tools

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups

Thin Flange Bottom Bracket Socket Pro Kit These sockets are designed to create a tight grip on thin flange bottom brackets to avoid slipping while torquing cups into bike frames. These single-sided sockets are used for installing and removing 48.5mm 16-notch, 52mm 16-notch and 50mm 12-notch bottom bracket cups. The sockets have a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and threaded onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red Kit includes: (1) 1/2" UNC Threaded Rod (1) 1/2" Adjustable Press Stop (1)6806/29 Bearing Drift (1)6806 Bearing Drift (1) 24x37 Bearing Drift (1) Wheels MFG Thin Flange Bottom Bracket Socket for 48.5mm 16-notch pattern. (1) SRAM Thin Flange T47 Bottom Bracket Socket for 52mm 16-notch pattern. (1) Praxis Thin Flange T47 Bottom Bracket Socket for 50mm 12-notch pattern.

Compatible with our Professional Chain Tool and the new Master Chain Tool

The tool features an 8mm hex in the middle of it for those really stuck caps

- For unscrewing and tightening of front chain ring nuts - The dimension of the hexagonal key opening is SW10 - Material: premium flex plus carbon steel

Material: premium chrome vanadium steel

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.

Material: premium chrome vanadium steel

- Blade chrome plated, black anodised tip - Handle – polypropylene

The single sided cone wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

A handy tool to prevent spoke windup when working with bladed spokes Slots from 1.0mm-2.2mm for most spoke sizes

The single sided headset wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

Three most popular TORX sizes: T10, T15 and T25mm

The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.

The freewheel remover is used for removing an assembling Campagnolo® freewheels. Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI

- Designed to fit any 1/2" drive socket - Pro Socket Handle offers enough length (250mm tip-to-tail) for good leverage while still being compact enough to carry with you in your tool roll or tool case - Chrome-vanadium steel for high strength and chrome plated it for corrosion prevention - Spring-loaded ball bearing keeps whatever tool you're using from falling off

Four sided spoke nipple engagement means fewer rounded off nipples. Offered in two sizes: 3.3mm and 3.45mm to fit most common spoke nipples, the 1630/2P spoke wrench has a plastic dipped handle for comfort and ease of use.

Use in conjunction with our Star Nut Setter to ensure the star nut is driven in straight. Compatible with 1" and 1 1/8" steerers.

The conically shaped tip of the tool is designed to slide between the pads inside the caliper and spread the pads by pushing pistons back into the caliper. Tool is bent 30° for easier access to the caliper

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened

Unior, Cartridge BB tool 20 tooth, Bottom Bracket Tool, Cartridge For: Shimano®, ISIS® Material: premium flex plus carbon steel

- Quickly and accurately determine the wear and stretch of any chain

Unior, Bracket Socket BB9000, Bottom Bracket Tool, BB-9000 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Unior, Bracket Socket BBR60, Bottom Bracket Tool, BBR60 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Material: premium plus carbon steel, drop forged, entirely hardened and tempered, cutting edges induction hardened

Unior, Bracket Socket 16 Notch, Bottom Bracket Tool, Hollowtech II Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles