Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$24.95
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Dura-Ace STI Lever Hoods to make your bike feel new again.
- Fits Dura-Ace 9001 STI levers
$5.99 - $6.50
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes
$6.99
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$18.00
- From a long line of tough, light-weight chain engineering from SRAM
- Chain connector type: PowerLock
- For Use with SRAM 12-Speed Road Chains Only
- No tools necessary to install
- Chain connector qty/packaging: 4
$5.99 - $18.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$51.99 - $64.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
$189.00
The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose.
- Armrest Offset: -70mm to -2.5mm in 7.5mm steps
- Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm)
- Armrest Stack: 60mm to 70mm in 5mm increments (with aftermarket Riser Kit)
- Extension length and rotation can be easily adjusted using the top bolt
- Weight: 545g
$8.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$2.75 - $2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$18.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with Shimano, SRAM, and KMC 11-speed chains
$4.99
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$4.50
- Missing links to make chain installation, maintenance and reparation easier
- Reusable up to 3 times
- Compatible with 6, 7 and 8 speed IG drivetrains
- Pin width: 7.1mm
- Card of 2
$5.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$7.95
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$16.00
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$8.49
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$41.99
High-quality replacement headset bearings are smooth like butter.
- Sealed cartridge bearing for long life
- Durable steel bearing housing
$42.00 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$38.99 - $39.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
$8.50
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases.
Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
Key features:
- Bases for use with Elite stem
- Add any XXX accessory mount for an elegant integrated look
$14.99 - $19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with the Madone KVF Aero Integrated Bar/Stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$36.99
Keep your seatpost right where you left it.
- Cable actuated remote lever for the Bontrager Line Dropper seatpost
- Also compatible with most other cable-actuated dropper seatposts
- Designed to ergonomically replace the left shifter on 1x drivetrains
$14.99
Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments.
- Follow laser-etched torque listing on collar
$59.99
Genuine replacement parts
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
Details:
- Replacement cartridge units for Bontrager Line Dropper seat posts
- Be sure to use the correct size cartridge for the respective amount of travel
- Regular maintenance will help maintain performance and extend the lifespan
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$24.99
Get back on the trail with a quality replacement hanger.
- Original equipment replacement rear derailleur hangers
- Attachment hardware is sold separately
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut
$19.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt