Alpine Ski Bindings

For skiers looking for the ultimate versatility in their setup, with uncompromising big mountain performance plus the ability to take advantage of true Pin Tech climbing functionality, the Duke PT ushers in a new era. Marker sets yet another milestone, adding to the Royal Family heritage with the introduction of this hybrid freeride binding for the 2020-21 season. The biggest highlight of this new binding is the innovative Quad-Lock Ride & Hike toe. In ride mode, it provides uncompromising downhill performance with full safety release properties from DIN 4-12. Switching the binding to hiking mode is simply a matter of unlocking the upper part of the toe piece and rotating it forward. Pin binding technology is integrated into the base plate underneath the toe housing and operates in much the same way as Marker's KingPin and Alpinist models. In uphill mode, you have the option of saving 250 grams weight per foot by removing the toe housing sections and stowing them in your backpack. To switch to downhill mode, the toe housing clicks back onto the base plate. It locks back into place thanks to Auto Quad-Lock technology, just by stepping into the binding, without any extra action required by the skier. Another advantage, the Hollow Linkage heelpiece gives the skier the security and power transmission as our Squire freeride binding on the way down. The Duke PT also features SOLE.ID technology, just like other products in the Royal Family. This makes the binding compatible with all boot sole types falling under the Alpine (ISO 5355), Touring (ISO 9523), or GripWalk (ISO 9523) norms. ANTI-ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. LOCK & WALK BRAKE - Including neutral walking mode and 10° climbing aid. AUTO QUAD LOCK - Toe part locks itself at 4 different points automatically when stepping into the binding. RIDE & HIKE TOE - For great Royal Family downhill performance and release function combined with pin-technology for strong uphill performance; DIN 6 – 16 Convertible toe: - Save 300g per foot for the uphill. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. HOLLOW LINKAGE HEEL - The Hollow Linkage Heel was designed to optimize retention for all common types of alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The very robust construction is best suited for the most strenuous requirements.

The freeride pivot ski binding sets the standard for control and release for the world's most dedicated skiers. The binding's Full Action toe piece and unique "turntable" heel design offer expert freeskiers a responsive connection between boot and ski for instant power transmission and precise ski control. It features powerful shock absorption and travel with confident retention and release for aggressive skiing. It's compatible with all traditional Alpine (ISO 5355) and GripWalk boot soles. Look's classic pivot turntable heel design offers 28mm of elastic travel and rotates directly under the tibia, delivering elite-level shock absorption and the industry's most trustworthy retention for a significant reduction in unwanted pre-release. Long Elastic Travel Longer elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Short Mounting Zone The shortened mounting zone provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex. Rolling Control LOOK binding components are designed to deliver industry-leading roll coupling strength (boot-to-binding interface). This ensures minimal roll before the boot engages the binding for the most efficient power transmission in skiing. GripWalk GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) Full Action Toe Piece Featuring 45mm of elastic travel and 180° multi-directional release, the FULL ACTION toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission. Multi Directional Release LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: 75 - 95mm - Weight: 1115g 1/2 Pair - DIN/ISO: 05-14

Its Forza 3.0 color conveys a cool attitude. The Pivot 14 GripWalk binding is a lightweight version of the Pivot 18 used by the best freeskiers. The binding's full action composite toe piece and iconic pivoting heel come together to provide secure and optimal retention, without the fear of unwanted pre-release. The Pivot binding is compatible with ISO 5355 A and GripWalk ISO 23223 A adult boot soles. - Pivot, GripWalk, short mounting zone, long elastic travel, full action toe piece, multi directional release, rolling control - Din: 5-14 - Toe piece anti-friction: full action GW AFD - Toe piece type: full action - Heel piece system: pivot - Heel piece type: pivot - Brake width: 75-95 mm, 95-115 mm - Length adjustment: 16 mm - Stand height: 19 mm

The freeride pivot ski binding sets the standard for control and release for the world's most dedicated skiers. The binding's Full Action toe piece and unique "turntable" heel design offer expert freeskiers a responsive connection between boot and ski for instant power transmission and precise ski control. It features powerful shock absorption and travel with confident retention and release for aggressive skiing. It's compatible with all traditional Alpine (ISO 5355) and GripWalk boot soles. Look's classic pivot turntable heel design offers 28mm of elastic travel and rotates directly under the tibia, delivering elite-level shock absorption and the industry's most trustworthy retention for a significant reduction in unwanted pre-release. Long Elastic Travel Longer elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Short Mounting Zone The shortened mounting zone provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex. Rolling Control LOOK binding components are designed to deliver industry-leading roll coupling strength (boot-to-binding interface). This ensures minimal roll before the boot engages the binding for the most efficient power transmission in skiing. GripWalk GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) Full Action Toe Piece Featuring 45mm of elastic travel and 180° multi-directional release, the FULL ACTION toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission. Multi Directional Release LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: 75 - 95mm - Weight: 1115g 1/2 Pair - DIN/ISO: 05-14

Its Forza 3.0 color conveys a cool attitude. The Pivot 12 GripWalk binding is a lightweight version of the Pivot 18 used by the best freeskiers. The binding's full action composite toe piece and iconic pivoting heel come together to provide secure and optimal retention, without the fear of unwanted pre-release. The pivot binding is compatible with ISO 5355 A and GripWalk ISO 23223 A adult boot soles. - Pivot, GripWalk, short mounting zone, long elastic travel, full action toe piece, multi directional release, rolling control - Din: 4-12 - Toe piece anti-friction: full action GW AFD - Toe piece type: full action - Heel piece system: pivot - Heel piece type: pivot - Brake width: 75-115 mm - Length adjustment: 16 mm - Stand height: 19 mm

Designed For Committed Alpine Ski Racers, The SPX 15 Rockerace Is An Elite-Level Competition Binding. The strongest retention and longest elastic travel on the market deliver instant power transfer and precise control with superior shock absorption for reduced pre-release. Its short mounting zone and semi-suspended heel enhance ski flex for more precision and control. It's only compatible with R22-plate-equipped skis and ISO 5355 boots. The Rockerace concept comes directly from the latest prototypes used by our World Cup riders. With its reduced implantation and a semi-suspended heel, it allows you to control even more flex the ski while maintaining maximum precision: without control, power is nothing! Long Elastic Travel - Longer elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. Short Mounting Zone - The shortened mounting zone provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex. Rolling Control - LOOK binding components are designed to deliver industry-leading roll coupling strength (boot-to-binding interface). This ensures minimal roll before the boot engages the binding for the most efficient power transmission in skiing. Race Aluminum Toe Piece - Featuring 45mm of elastic travel and 180° multi-directional release, the all-metal RACE toe piece offers maximum power, precision, and durability across all disciplines, from the Alpine World Cup to Freestyle, Freeride and Moguls. Multi-Directional Release - LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: < 80mm - Weight: 1295g 1/2 Pair - DIN/ISO: 7-15

The Attack 14 GW binding is a tough, all-mountain binding for high performance from powder and piste to the park and beyond. The binding features the FR PRO 3 toe with guaranteed constant release values. Its versatile functionality makes it the ideal tool for every freeskier! All Attack bindings offer an improved stability and an updated heel design. Now the heel can be adjusted faster and in an open position. Additionally, the binding comes with an improved AFD which reduces friction and guarantees constant release values. The Attack binding line is compatible with adult Alpine (ISO 5355 TYPE A) and adult Walk ski boots (ISO 23223 TYPE A). Thanks to the improved AFD, it easily adjusts to different boot sole heights. The optimal height adjustment needs to be tested with a testing device for exact adaptation of the boot-binding system and better on-ski performance. - STAND HEIGHT: 17mm - DIN: 4 - 14 - WEIGHT: 2020g Technologies: - GRIPWALK COMPATIBLE: Accommodates adult Alpine (ISO 5355 TYPE A) and Walk ski boots (ISO 23223 TYPE A). The height of the AFD needs to be adjusted to the ski boot sole height. Optimal height shall be tested with the boot height adjustment tester.

The lighter version of the Jester, providing the same features for younger and lighter riders, is one of the most versatile freeride bindings on the market today, made for advanced to expert skiers. Its SOLE.ID technology allows to adjust the binding to accommodate either AT or Alpine boot sole norms. On top the Griffon 13 ID features no-pull-out screws and a centralized swing weight: cross-axis toe spring and compact mounting lead to a short binding, ideal for spins & twists. Recommended for skis over 76mm, available with 90, 110 and 120mm brakes in 2 color combinations. SOLE.ID - One binding, two boot norms - Whatever boot you wear, all Marker SOLE.ID bindings are compatible to every kind of ski boot! Whether you prefer alpine boots or boots with touring sole, with SOLE.ID the bindings can be adjusted in seconds. The secret is the height-adjustable gliding plate; easy to handle and of course providing uncompromising performance. SOLE.ID respects ISO 5355 (alpine boots) and ISO 9523 (boots with touring soles). AFD STAINLESS STEEL - All MARKER bindings are equipped with a moveable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children's bindings or on ski tours. INTER PIVOT HEEL - The stunning heel construction delivers superior holding power for free riding, featuring DIN/ISO 6-16. The Inter Pivot Heel directs the power forces in the angle of elasticity improving the holding power and reducing pre-releases. TRIPLE PIVOT ELITE TOE - The toe construction with DIN/ISO up to Z 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5° it provides the highest energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.

Skiing’s most popular binding for many years, the Griffon is totally re-designed for 2020/21. Starting up front, the new Triple Pivot Elite 3 toe piece with integrated Anti-Ice Rail gives the binding a new look and a great way to remove snow and ice from your boot soles without damaging the binding housing. The Inter Pivot 3 heel maintains its signature power transmission, while also having been re-designed to make it easier to step in, especially with many of today’s rubber boot soles. Offered in 90, 100, 110, and 120mm brake widths, all ski shapes are covered. With SOLE.ID technology, the Griffon offers 100% compatibility with any boot fitting the ISO 5355 (Alpine) and ISO 9532 (Alpine Touring) norms. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. AFD GLIDING PLATE - MARKER bindings are equipped with a moveable AFD (anti-friction device) supporting a precise release almost entirely unhindered by dirt, snow, and ice! Individual adjustment of the AFD to the area of application enhance optimized functionality - from racing, for children’s bindings, or on ski tours. ANTI-ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. INTER PIVOT 3 FREERIDE HEEL - The third and newest generation completely redone: improved power transmission, energy absorption, and vertical heel elasticity combined with an improved step-in comfort. TRIPLE PIVOT ELITE TOE - The toe construction with DIN/ISO up to Z 18 allows for impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5°, it provides higher energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.

The identical design to that of the X-cell 16.0 with World Cup-approved X-cell technology and the Twin Cam X (TCX) heel design, but with DIN settings tailored to young racers and with lighter weight fiberglass reinforced resin sole holders. It is the go-to binding for U12 and U14 racers needing the ultimate precision and power transmission. AFD STAINLESS STEEL - All MARKER bindings are equipped with a movable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children’s bindings or on ski tours. INTELLIGENT BACKWARD RELEASE -Intelligent Backward Release clearly differentiates between forces that occur during a backward twisting fall and moments of force that originate from a movement onto the edge of the ski to enter into curves. An individually adjusted spring reliably regulates the backwards release without any loss of performance. X-CELL TOE -The unique Xcell technology makes it possible to filter out short jolts and keep the ski boot perpetually centered. The new Xcell binding also offers what’s likely the most radical design in racing and inspired by F1 design. TWIN CAM X HEEL - The next logical step in the improvement of our Twincam heel, with more power, higher elasticity in the release and an optimized performance curve. The new construction increases the boot and ski connectivity for a longer period, even in extremely steep terrain, ensuring precise ski guidance until released. It also offers improved power transfer through the wider connection of the heel rail (NEW: 43 mm). The TC heel’s familiar effective step-in behavior has also been further improved.

Progressive, very light, and sturdy rookie freeride/freestyle binding that is GripWalk-ready and equipped with state-of-the-art components. The completely redesigned Squire 11 has progressive looks and is specially designed for lighter weight but fully motivated freeride and freestyle rookies. An extensively improved, lightweight Triple Pivot Light toe piece features a distinctive Ice Off Rail to keep the sole free of snow and ice. A state-of-the-art Hollow Linkage heel with its wider boot holder reduces the step-in force by approximately 35%, even with GripWalk soles. All in all, the Squire 11 is very compact and, despite its GripWalk compatibility, sits only 24mm high, which allows a very direct feel and ski control. - Category: Freeride - Brake width: 90, 100, 110mm - Din/ISO Range: 3.0 - 11.0 - Boot type:Adult, standard Alpine; GripWalk Adult - Recom. Skier's Weight: 30 - 110kg - Stand height w/o ski: 24mm - Toe System: Triple Pivot Light 2 - Step-in Heel: Hollow Linkage 2 - Heel adjustment range: 20mm - Weight: 820g - AFD Gliding Plate: Stainless Steel

The XComp 16 binding features premium components and technology, including magnesium sole holders and an updated 3-point mounting pattern of the one body toe piece. Absorbers deliver precise yet forgiving ski steering and control. The improved XComp dampening technology neutralizes the fast, hard impacts and keeps the boot perfectly centered.

Welcome to the world of youth racing. The Race 10 TCX uses the same heel technology as in the Race X-cell bindings, combined with the tried-and-tested TLT toe pieces, and all perfectly adjusted to the weight and skiing performance of young on-piste racers. This binding guarantees top skiing performance with great power transfer. AFD STAINLESS STEEL - All MARKER bindings are equipped with a moveable AFD (anti friction device) leading to a highly precise release almost entirely unhindered by dirt, snow and ice! Individual adjustment of the AFD to the area of application ensures perfect functionality - from racing, for children's bindings or on ski tours. TLT/ TLT2 - The next level of improvement for the tried-and-tested two linkage toe system. Light, robust, full side and rear release with improved DIN range. The release springs, triggered by the sole bracket, uses the clever TLT system to provide rear release without taking up extra space or adding extra weight. TWIN CAM X HEEL - The next logical step in the improvement of our Twincam heel, with more power, higher elasticity in the release and an optimized performance curve. The new construction increases the boot and ski connectivity for a longer period, even in extremely steep terrain, ensuring precise ski guidance until released. It also offers improved power transfer through the wider connection of the heel rail (NEW: 43 mm). The TC heel's familiar effective step-in behavior has also been further improved. INTELLIGENT BACKWARD RELEASE - Intelligent Backward Release clearly differentiates between forces that occur during a backward twisting fall and moments of force that originate from a movement onto the edge of the ski to enter into curves. An individually adjusted spring reliably regulates the backwards release without any loss of performance.

The NX 11 GripWalk binding is a user-friendly all-mountain binding for recreational skiers. Its lightweight toe piece and NX heel work together to deliver strong power transmission and fluid shock absorption with an easy step-in design. The Full Drive Concept toe design allows upward release independent of the heel for the most dynamic release in the event of a fall. The binding's overall lightweight construction makes skiing and carrying skis easier. It's compatible with adult ISO 5355 and GripWalk boot soles. A lightweight, easy step-in design, the NX heel offers maximum ease-of-use balanced with confident retention and downhill performance. Easy Step-In/Step-Out - Intuitive design with wide step-in zone offers easy entry-and-exit. GripWalk GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) Light Weight - LOOK utilizes composite materials and optimized designs to produce lightweight bindings with the highest levels of retention and release to make skiing and carrying your skis easier, with no compromise in performance or protection. FDC Toe Piece - The FDC toe piece offers a lighter weight design with best-in-class elastic travel and 180° multi-directional release delivering reliable retention and release for confident alpine performance. Multi-Directional Release - LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: 80 - 90mm - Weight: 915g 1/2 pair - DIN/ISO: 3.5-11

High-performance race binding specifically developed for U12 and U14 athletes. The Xcomp 12 features all the premium construction details but is specifically adapted to the needs of U12 and U14 racers. This includes the updated 3-point mounting pattern of the one body toe piece. In combination with two absorbers, the Xcomp 12 delivers very strong power transmission but forgiving performance. The improved Xcomp dampening technology eliminates all the fast, hard impacts and keeps the boot perfectly centered. - Category: Race - Brake width: 85mm - Din/ISO Range: 4.0 - 12.0 - Boot type: Adult, standard Alpine; GripWalk Adult - Recom. Skier's Weight: <120kg - Stand height w/o ski: 15mm - Toe System: Xcomp - Step-in Heel: TCX - Heel adjustment range: 20mm - Weight: 1170g - AFD Gliding Plate: Stainless Steel

The NX 10 GripWalk Binding Is a User-Friendly Junior Race Binding. Its lightweight toe piece and NX heel work together to deliver strong power transmission and fluid shock absorption for competitive young racers. The Full Drive Concept toe design allows upward release independent of the heel for the most dynamic release in the event of a fall. The binding's overall lightweight construction makes skiing and carrying skis easier. It's compatible with adult ISO 5355 and GripWalk boot soles. A lightweight, easy step-in design, the NX heel offers maximum ease-of-use balanced with confident retention and downhill performance. Easy Step-In/Step-Out - Intuitive design with wide step-in zone offers easy entry-and-exit. Light Weight - LOOK utilizes composite materials and optimized designs to produce lightweight bindings with the highest levels of retention and release to make skiing and carrying your skis easier, with no compromise in performance or protection. GripWalk - GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) FDC Toe Piece - The FDC toe piece offers a lighter weight design with best-in-class elastic travel and 180° multi-directional release delivering reliable retention and release for confident alpine performance. Multi-Directional Release - LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: < 73mm - Weight: 795g 1/2 Pair - DIN/ISO: 3-10

Lightweight, fast, responsive and equipped with the latest safety technology, the RC4 Z9 GW AC offers young skiers great race performance. In addition, the binding is compatible with adult and child ski boots as well as Grip Walk and Grip Walk Junior ski boots.

Precisely adjusted to junior racers' demands. Designed for U10s and heavier U8s. The Race Junior 8 is perfectly adjusted for the requirements of the youngest racers with a DIN setting up to 8. Tailor-made for lightweight on-piste skiers who know how to set a good, hard edge. The TLT toe and Compact 3 heel designs deliver higher performance than the 7.0 and 4.5 bindings. Attention: The heel fits kids' boots only! - Category: Race Junior - Brake width: 85mm - Din/ISO Range: 2.0 - 8.0 - Boot type: Children, standard Alpine; GripWalk Junior/Kids - Recom. Skier's Weight: 30 - 105kg - Stand height w/o ski: 15mm - Toe System: 2 linkage Junior - Step-in Heel: Compact 3 - Heel adjustment range: 20mm - Weight: 830g - AFD Gliding Plate: Stainless steel

Light, fast, responsive and fitted with the latest safety technology, the EVO 9 GW CA provides junior racers with race-winning performance. Light, fast, responsive and fitted with the latest safety technology, the EVO 9 GW CA provides junior racers with winning performance. With a stand height of 21 mm and a maximum DIN of 9, this race-ready binding is equipped with our SX Lite toe and heel, for unrivalled power transmission, improved kinematics, reduced load on joints and 180° vertical and diagonal friction-free boot release. For race-winning confidence, choose the EVO 9 GW CA. Added benefit: compatible with Alpine Adult and Children ski boots, plus GripWalk and GripWalk Junior ski boots. Additionally, the model is equipped with the PowerBrake, which provides better brake retraction for greater edge angles. To provide outstanding performance and the highest stability for our young speedsters with TYPE C (children) ski boots, we offer a vertical blocked slider as a spare part. ONLY for TYPE C and GripWalk Junior ski boots: AFS SX Jr/Kid – blocked (Type C & GripWalk Junior). - STAND HEIGHT: 21 mm - DIN: 2 - 9 - WEIGHT: 1510 g - SX Lite Toe with TRP System - Full Diagonal - ISO: 5355A, 5355C, 9523 GripWalk - SX LITE Heel - Brake [D] 85 mm

Top skiing performance with optimal power transfer for the up-and-coming race generation. Welcome to the world of youth racing. The Race 10 TCX uses the same heel technology as in the Race X-cell bindings, combined with the tried-and-tested TLT toe pieces and all perfectly adjusted to the weight and skiing performance of young on-piste racers. This binding enables top skiing performance with great power transfer. - Category: Race Junior - Brake width: 85mm - Din/ISO Range: 3.0 - 10.0 - Boot type: Adult, standard Alpine - Recom. Skier's Weight: 30 - 105kg - Stand height w/o ski: 15mm - Toe System: 2 linkage - Step-in Heel: TCX - Heel adjustment range: 20mm - Weight: 1080g - AFD Gliding Plate: Stainless steel

Stability, direct power transfer and precision ski control – this is the SX 7.5 GW CA binding for junior skiers with progress in mind. The SX 7.5 GW CA for junior skiers is a tech driven bundle of supreme safety and enhanced power transmission for a progressive, confidence building ride. Our SX Junior toe and heels are renowned for their precise boot hold, exact rider-to-ski power transfer and the reduced load on joints of our Full Diagonal release function. Add to this improved kinematics and a 180° vertical and diagonal friction-free boot release and you have a junior binding for confident and fast fun. The binding will fit both adult and children ski boots, plus GripWalk and GripWalk Junior ski boots. NEW: an updated heel for an easier entry. - Stand Height: 21mm - DIN: 2 - 7.5 - Weight: 1400g Features: - SX Junior Toe with TRP System - Full Diagonal - ISO: 5355A, 5355C, 9523 GripWalk - SX Youth Heel - Brake [J] 78 mm Technologies: - Gripwalk: Accommodates all Alpine ski boots (ISO 5355 TYPE A) plus all GripWalk ski boots (ISO 23223 TYPE A). - -EASY STEP-IN: Step in and out in seconds without any help. The new shape of the sole lug makes it easier to position the ski boot correctly in the binding. Softer brakes reduce the entry force into the binding by 15%, guaranteeing less resistance when stepping down.

Designed for junior competitive skiers, the SPX 10 GripWalk B73 binding is based on our World Cup styles, with which it shares its hot red color. Its extremely long elastic travel ensures excellent retention, instant power transfer and superior shock absorption for maximum reduced unwanted pre-release. It's compatible with skis equipped with an R21 pro plate, along with ISO 5355 A and GripWalk ISO 23223 A adult boot soles. SPX, GripWalk, FDC toe piece, long elastic travel, multi directional release, rolling control - Din: 3-10 - Toe piece anti-friction: FDC GW AFD - Toe piece type: FDC - Heel piece system: 2p - Heel piece type :SPX - Brake width: <73 mm - Length adjustment: 24 mm - Stand height: 16 mm

The SPX 10 GripWalk Binding Is a High-Performance Binding For Aggressive Junior And Smaller Adult Skiers. Featuring the strongest retention and longest elastic travel on the market, the SPX delivers instant power transmission and precise control with superior shock absorption to reduce unwanted pre-release. The toe allows upward release independent of the heel for the most effective protection in the event of a fall. It's compatible with all traditional Alpine (ISO 5355) and GripWalk boot soles. Look's SPX heel design offers 27mm of elastic travel for best-in-class shock absorption, confident retention, and a significant reduction in unwanted prerelease. An oversize heel pivot increases coupling strength (boot-binding interface) for more efficient power transmission. Long Elastic Travel - Longer elastic travel ensures more reliable retention to keep you in when you need. LOOK bindings offer the most elastic travel (lateral and vertical) and the fastest re-centering prior to release, ensuring superior shock absorption to reduce unwanted pre-release. GripWalk GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) Rolling Control - LOOK binding components are designed to deliver industry-leading roll coupling strength (boot-to-binding interface). This ensures minimal roll before the boot engages the binding for the most efficient power transmission in skiing. FDC Toe Piece - The FDC toe piece offers a lighter weight design with best-in-class elastic travel and 180° multi-directional release delivering reliable retention and release for confident alpine performance. Multi-Directional Release - LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: < 73mm - Weight: 900g 1/2 Pair - DIN/ISO: 3-10

Regardless of the conditions—this is the children's model with the greatest flexibility.

The NX 7 GripWalk Binding Is a User-Friendly Junior Race Binding. Its lightweight toe piece and NX heel work together to deliver strong power transmission and fluid shock absorption for competitive young racers. The Full Drive Concept toe design allows upward release independent of the heel for the most dynamic release in the event of a fall. The binding's overall lightweight construction makes skiing and carrying skis easier. It's compatible with adult ISO 5355 and GripWalk boot soles. A lightweight, easy step-in design, the NX heel offers maximum ease-of-use balanced with confident retention and downhill performance. Easy Step-In/Step-Out - Intuitive design with wide step-in zone offers easy entry-and-exit. Light Weight - LOOK utilizes composite materials and optimized designs to produce lightweight bindings with the highest levels of retention and release to make skiing and carrying your skis easier, with no compromise in performance or protection. GripWalk GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) FDC Toe Piece - The FDC toe piece offers a lighter weight design with best-in-class elastic travel and 180° multi-directional release delivering reliable retention and release for confident alpine performance. Multi-Directional Release - LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: < 73mm - Weight: 765g 1/2 Pair - DIN/ISO: 2-7