Accessories

Warm feet are happy feet Extend your riding season with the S2 Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in temps below 30°F/-1°C. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Neoprene for insulation and protection in cold and wet conditions - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance biomotion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures Details - Fiber Content: 79% Rubber / 15.5% Nylon / 5.2% Polyester / 0.3 Polyethylene

Beautiful biomotion The Halo S1 Softshell Shoe Cover is your answer for day and night detectability at temps at or above 30-degree F/-1-degree C. With both high-viz color and reflective material in a single garment, Halo provides ultimate visibility, day or night. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Provides biomotion visibility to ensure you're seen by motorists day or night - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance bio-motion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures

Shield your legs from bad weather with all over protection from wind and water. Designed for anatomical pedaling comfort, they won’t slip or constrict the legs. - P.R.O. Softshell fabric on forward facing areas provides optimal wind protection and water resistance - Thermal Fleece fabric with water shedding PI Dry technology for all-weather performance - Anatomic front-to-back construction eliminates bunching through the full range of motion - Plush wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Zippered ankle for easy off and on

Beautiful biomotion The Halo Thermal Leg Warmer delivers comfortable warmth in cool conditions. A Biomotion Halo colorway integrates high visibility, and large-field reflective offers day and night detectability. Key features - Profila Thermal fabric traps body heat and wicks away moisture to keep you warm and dry - Provides biomotion visibility so you'll be seen by motorists day or night - Anatomic left and right articulated design for a perfect fit - Soft custom jacquard gripper with silicone print for a stay-put fit - Semi auto-locking zippers for easy on/off - Fitted cut provides streamlined body fit for enhanced performance

Made with durable Softshell fabric for wind and water resistance, this cover is designed for mountain bike shoes and offers warmth and protection in cool, wet weather. An innovative power band that secures the front under your toes and a new, easy-to-use hook-and-loop closure offer durable, comfortable performance to keep your feet warm and dry. - Two stage hook and loop closure provides both sleek fit and easy on and off - Innovative power band secures front of shoe cover under toes - Softshell fabric provides optimal wind protection and water resistance - Anatomic paneling for a performance fit - Kevlar mountain bike bottom spreads open for easy on and off while providing superior durability - Recommended for mountain bike shoes - For X–Alp compatibility, use shoe cover that is equivalent to your X–Alp shoe plus one shoe size - Reflective elements for low–light visibility

Durable construction combines with insulating wind and water-resistant fabric that protects feet from the coldest conditions. - Softshell fabric provides optimal wind protection and water resistance - Two stage hook and loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - Kevlar road bottom spreads open for easy on and off while providing superior durability - For road shoes with external cleats - BioViz reflective elements for low-light visibility

Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding

Quickly convert shorts into cozy tights with Pearl's best-selling Thermal Fleece leg warmers, now updated with water shedding PI Dry technology for all weather performance. - Thermal Fleece fabric with water shedding PI Dry technology for all-weather performance - Anatomic construction eliminates bunching through your full range of motion - Plush wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Zippered ankle for easy off and on

Use these easy-to-slip-on covers over your treaded MTB shoes to keep your feet warm and dry in the sloppiest riding conditions. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable Kevlar bottom holds up to trail use - Synthetic leather toe bumper adds scuff protection - Bottom is designed to fit treaded MTB style shoes - BioViz high visibility colors and reflective elements

When the conditions get wet, keep pedaling with warm and dry feet in these easy-to-slip-on, wind- and water-protective covers. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable rubber toe area provides superior traction on wet surfaces - For road shoes with external cleats - BioViz high visibility colors and reflective elements

When weather gets wet, windy and cold, these easily transform a short sleeve jersey into an arm warming, wind and water blocking machine. Now with an extra wide silicone gripper, they’ll never slip down or feel constricting around your arm. - P.R.O. Softshell fabric on forward facing areas provides optimal wind protection and water resistance - Thermal Fleece fabric with water shedding PI Dry technology for all-weather performance - Anatomic left and right arm-specific fit - Plush wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility

Stay warm and dry with the Thermal Leg Warmers. Pull on these warmers and confidently clip in for an enjoyable and comfortable cold-weather ride.

Now updated with water shedding PI Dry technology for all weather performance, this is the easiest way to add some knee saving warmth to a pair of shorts. The tailored fit won’t slip and is perfectly designed to keep your pedal stroke fluid. - Thermal Fleece fabric with water shedding PI Dry technology for all-weather performance - Anatomic construction eliminates bunching through your full range of motion - Plush wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility

Super comfortable, ultimate sun coverage. Wide grippers decrease slippage and eliminate gaps to make sure your entire leg is protected with UPF 50, even when the fabric is stretched up to 30 percent. - In–R–Cool technology to provide optimal skin-cooling effect and moisture management when you perspire - ELITE Transfer fabric with UPF 50+ sun protection and Ice-fil - BioViz reflective elements for low-light visibility - Easy slip-on fit - 93% polyester  7% elastane - Technology: Ice-fil

Bontrager's Visibility Thermal Knee Warmers are the perfect take-along for changing weather. Made of thermal fabric for warmth and breathability, they have grippers inside and out to keep them in place, and they're small enough to easily roll up and tuck in a pocket or pack so you're always prepared. The left/right anatomical cut gives you a perfect fit, too.

Pearl Izumi's thinnest, lightest and most aerodynamic shoe cover is perfect for racing or riding in cool, windy conditions. It's made with a breathable P.R.O. Barrier Lite fabric that stretches to optimize your aero advantage while keeping your feet dry and comfortable. It also features a zippered rear closure for improved aerodynamics. Features: - P.R.O. Barrier Lite fabric provides lightweight wind protection and water resistance - Wind tunnel tested for aerodynamics - Zippered heel closure for improved fit and improved aerodynamics - Recommended for road shoes with external cleats - Upper: 50% nylon 40% polyurethane 10% elastane; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane; Imported

Proven to deliver UPF 50 protection even when the fabric is stretched by 30 percent, the lightweight material used for these slip-on knee covers will keep you covered and cool so you can lay down the hammer at the height of summer. - In–R–Cool technology to provide optimal skin-cooling effect and moisture management when you perspire - ELITE Transfer fabric with UPF 50+ sun protection and Ice-fil - BioViz reflective elements for low-light visibility - Easy slip-on fit - 93% polyester  7% elastane - Technology: Ice-fil

Stay warm and dry with the Thermal Knee Warmers. Pull on these warmers and confidently clip in for an enjoyable and comfortable cold-weather ride.

Keep the scorching sun at bay with the UV Sunstop Knee Covers. Unlike lotions that eventually wear off because of perspiration, these covers allow you to enjoy all-day rides.

Bontrager's Visibility Thermal Arm Warmers are the perfect take-along for changing weather. Made of thermal fabric for warmth and breathability, they have grippers inside and out to keep them in place, and they're small enough to easily roll up and tuck in a pocket or pack so you're always prepared. The left/right anatomical cut gives you a perfect fit, too. • Profila Thermal fabric is engineered to trap body heat and wick moisture, keeping you warm and dry • Anatomic left and right design • Soft, custom jacquard gripper with silicone print for a stay-put fit • Reflective elements enhance visibility for maximum safety • Fitted: Streamlined fit for all-around cycling performance

Not your typical balaclava! An updated design gives this ultimate winter weather head cover added versatility, ideal for battling the most brutal cold conditions. Keep the moveable face panel all the way up for extreme warmth, then pull it down for easy temperature regulation—or quick access when you need to talk. The premium P.R.O. Barrier forehead fabric provides protection against wind, and P.R.O. Thermal Dry fabric adds fast-drying warmth while fitting easily underneath your helmet. - Adjustable face panel allows for easy temperature regulation - P.R.O. Barrier fabric panel on forehead provide lightweight wind protection and water resistance - P.R.O. Thermal Dry fabric provides optimal moisture transfer, dry time and odor absorption with warmth - Ergonomic cut layers easily under helmet - Reflective elements for low-light visibility - One size fits most

A trendy silhouette with superior foul weather function, this "Belgian cap" style combines a custom-cut brim with full head and ear coverage. Work your way through wind and rain while the P.R.O. Barrier fabric front panel and contoured brim provide protection, yet allow ample visibility; the brim even seals your cycling glasses from the elements, plus its plastic material makes the cap fully machine washable. - P.R.O. Barrier fabric panel on forehead provide lightweight wind protection and water resistance - P.R.O. Thermal Dry fabric provides optimal moisture transfer, dry time and odor absorption with warmth - Cycling specific bill provides weather protection without hindering visibility when riding hard - Ergonomic cut layers easily under helmet - Low profile ponytail port allows for long hair and does not interfere with helmet retention mechanisms - Reflective elements for low-light visibility - One size fits most

An absolute essential for cool weather riding, Pearl's best selling arm warmer is now updated with water shedding Thermal Fleece fabric with PI Dry technology for all weather performance. - Thermal Fleece fabric with water shedding PI Dry technology for all-weather performance - Anatomic left and right arm-specific fit - Plush wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - BioViz Screaming Yellow color option for added daylight visibility

Pearl Izumi's P.R.O. Thermal Toe Covers provide that extra bit of protection for your toes on chilly rides. Without the bulk and weight of full shoe covers, these toe warmers keep your feet cozy with P.R.O. Softshell fabric for wind and water protection. They're also equipped with a powerband to secure the front underneath your shoes, cleat cutouts in the tough Kevlar bottoms, and reflective accents for visibility. Features: P.R.O. Softshell provides optimal wind and water protection Innovative power band secures front of shoe cover under toes Kevlar bottom with hook and loop closure allows easy on and off Recommended for road shoes with external cleats Reflective elements for low–light visibility

Stay warm and don’t fuss with slippage thanks to a female-friendly smaller diameter arm opening and a wider gripper that doesn’t feel constricting. Updated with water shedding Thermal Fleece fabric, the ELITE Thermal Arm Warmer is an absolute essential for cool weather riding. • Women’s specific fit • Thermal Fleece fabric with water shedding PI Dry technology for all-weather performance • Anatomic left and right arm-specific fit • Plush Wide elastic binding with silicone gripper for a stay-up fit • BioViz reflective elements for low-light visibility • BioViz Screaming Pink color option for added daylight visibility

Stay warm and dry with the Thermal Arm Warmers. Pull on these warmers and confidently clip in for an enjoyable and comfortable cold-weather ride.

Hiking, fishing, canoeing, hanging out post-ride in the pits-whatever you're doing, the Trek Pit Bucket Hat will keep you cool. - Standard bucket hat made of 100% cotton - Fitted construction - Large flat bill design for ultimate protection from the elements - Sewn-on off-center Trek patch - Removable chin strap adjusts to your preferred length

Service-specific apparel, created by the certified service team. This hat makes you stand out as the professional technician you are.

When the weather is not yet warm, but not brutally cold, this cap offers just the right amount of coverage. Softshell center panels with bonded center seams deliver wind and water protection to the most exposed area of your head, while Transfer side panels offer ventilation and breathability.  - P.R.O. Transfer fabric provides optimal moisture transfer, dry time and odor absorption - Anatomic paneling for a performance fit - Cycling-specific bill provides sun protection without hindering visibility when riding hard - BioViz reflective elements for low-light visibility - 100% polyester

A snug and streamlined full head cover with a wind-resistant front panel to keep you cozy in the thick of winter. Precisely tailored to fit under a helmet, the Barrier Skull Cap's mildly scalloped back prevents fabric bunching while in the cycling position. P.R.O. Thermal Dry fabric provides quick-drying warmth, reflective elements enhance safety, and an otherwise hidden rear port opens as needed to accommodate a ponytail. - P.R.O. Barrier fabric panel on forehead provide lightweight wind protection and water resistance - P.R.O. Thermal Dry fabric provides optimal moisture transfer, dry time and odor absorption with warmth - Ergonomic cut layers easily under helmet - Low profile ponytail port allows for long hair and does not interfere with helmet retention mechanisms - Reflective elements for low-light visibility - One size fits most